ANy one have an idea about this. I'm on mission 5. and I want the player to do some area traggers. I just can't get the player to trip any thing.
any one have some good ideas on that
Thanks
Printable View
ANy one have an idea about this. I'm on mission 5. and I want the player to do some area traggers. I just can't get the player to trip any thing.
any one have some good ideas on that
Thanks
Need a little more details on what your shooting for.
I been having problems with not being able to get players to trip an area trigger. I check it out and well theres no ID or SSN for the player. or am I missing some thing. I'm not sure about what to do. If I setup an area trigger and want the player to trip it.
It doesn't work
Hope that helps
Set your players to a group (Good-Blue).
Make sure you set the events to trigger on that group.
Group (1) has entered area trigger (1)
I am going to warn you one more time Joe - you either put your Posts in the correct forum - or I am going to either:Quote:
Originally Posted by Bigjoe11a
1. Remove your post. (And all of your previous posts)I have too much to do - to have to clean up after you. Apparently, you decided to ignore my post about this.
or
2. Remove your ability to post. (And your account)
Next time you break the rules, a letter to ZAK will not get you back in.
Ok, first off this is the first time I even heard about it. 2nd of all I havn't been able to get on here to contact any one. I didn't know what to do. So I contacted ZAK. to get a hold of some one. 3rd, as far as I know it's not in the wrong formum. If I ask a question about C4 in the C4 forum, how is that in the wrong Forum. Right. If you look at the top. It say C4 map editing. SO I want you to tell me how in this in the wrong forum.
Hay Charger, thats what I mean, How do I do that. Do I do that to the player start maker, It the only thing I put in the map that that refers to the player.
Thanks
Ok, after reading the post you added to that forum. I never got it. and you closed it so that mite be why. I have your system to send me emails when people reply to my post. Well I never got a post back from that. So look I NO idea why. For some reason. When you post a message. I'm not getting an email about it. The only reason I fount this one, is that some some one else reply to my post.Quote:
Originally Posted by Bluetiereign
Tom and I couldn't find out how to do this. So he when to others forums to get this information. and that was over a week ago.
and I don't even have a manual that more them 20 pages. and I never got your sample untill now
So I have NO idea on whats going on, I'm lost
Ok, fair enough. Consider yourself given a fresh start. Please follow the rules and post in the correct forums.
This is in the right Forum. I'm asking about C4 so it is in the right forum. and you deleted my other post. so the information is gone. So How do I get that information. I NEED IT
and I'm looking over the squib sample that you sent me. Sorry I never got it. Thanks
YOU HAVE TO SEND ME AN EMAIL. For some reason I'm not getting your post.
and IF I do some thing wrong, PLEASE send me an email.
See If I don't get any post form the forum and NO emails telling that I have a message waiting. More then likly I won't return to the forum. I never do. I go some where else
You can download the manual here.
It is in the right forum - BECAUSE I PUT IT HERE.
You keep posting in the C4 Game forum - not the C4 Map editing forum.
I can do nothing about about the automatic forum mailer notifying you about my responses and I do not have time to email everyone when I reply to their post Joe, I am sorry. I will do it this time - but it will be the last.
Again, I am sorry that I cannot personally notify you when I post.
I already have those manuals, and they didn't say any thing about squib. how ever I will check again.
Ok, so maybe thats where I'm screwing up at. The only questions I have are map making. I have to check that to.
Let me check again.
Oh, now I see what your talking about. I was placing my post in the C4 Gaming area and not the C4 maping area.. I wish I could have been told soon, sorry
Like I was telling some one else. My eye site is that bad. Again I'm sorry I didn't know
thanks for your help
Quote:
Originally Posted by Bigjoe11a
You apparently don't have the DFBHD Manual. That manual is 40 pages long.Quote:
Originally Posted by Bigjoe11a
No Problem... do your checking and post your questions.
Ok, thanks
Any way thats what I have and it still doesn't work. so far as I know.Quote:
Originally Posted by Charger
What do I check the player start marker or am I missing some thing
Thanks Charger
Do this Joe.
Open the editor with the map in it. Go to Edit -> Events. When that window opens - look in the lower right hand corner and choose Print All Events. Save the text file as events.txt. Close the editor. Open the text file and copy and paste what is in that file in here so we can see what you have.
Ok, Here you are
/ Event List for C:\Program Files\NovaLogic\Comanche 4\test.mis, saved on 10/14/2006, 21:48
Event 0: Test 2
Reset after 5 seconds
Bad Texttool String Group 1 is within area 1
Actions:
Create particle effect at teleport target 1
Thats all I'm trying to do it to get it to set off a area trigger
Ok, Tell you what here comes the hole thing. This is from my mission 3, Look at event 27. 3 Groups and the player have to return to this area trigger in order to end the game. It's not working
// Event List for C:\Program Files\NovaLogic\Comanche 4\Ice_man3.mis, saved on 10/14/2006, 22:22
Event 0: Guards
Actions:
Redirect group 4 to waypoint list 1
Redirect group 5 to waypoint list 2
Event 1: Supply Trucks Destroyed
Bad Texttool String Group 7 has been destroyed
Actions:
Sub Goal 1 won [Mission Critical]
Event 2: Support troops on red alert
Bad Texttool String Group 11 is within area 1
Actions:
Change group 11 AI to Red Alert
Event 3: Enemy Camp goes on Red Alert
Bad Texttool String Group 9 has been destroyed
Actions:
Change group 8 AI to Red Alert
Event 4: SEnd Enemy Patrol 1
Bad Texttool String Group 1 is within area 2
Actions:
Change group 13 AI combat speed to 50 km/h
Change group 13 AI patrol speed to 50 km/h
Redirect group 13 to waypoint list 6
Event 5: Send Blackhawk
Bad Texttool String Group 10 has been destroyed and
Group 6 is still alive
Actions:
Change group 6 AI combat speed to 40 km/h
Redirect group 6 to waypoint list 4
Event 6: Blackhawk Coming In
Bad Texttool String Group 6 reaches waypoint 4, 4
Actions:
Change group 6 AI combat speed to 20 km/h
Event 7: Blackhawk Landing
Bad Texttool String Group 6 reaches waypoint 4, 5
Actions:
Change group 6 AI AI state to Land
Event 8: Sending Soldiers
Delay event 14 seconds
Bad Texttool String Group 6 reaches waypoint 4, 5
Actions:
Teleport group 15 to target 1
Change group 15 AI to Red Alert
Change group 11 to team Blue
Event 9: Getting hostage to chopper
Delay event 30 seconds
Bad Texttool String Event 8 has been triggered and
Group 6 reaches waypoint 4, 5
Actions:
Change group 11 AI to Red Alert
Redirect group 11 to waypoint list 8
Event 10: Getting Hostage on Chopper
Bad Texttool String Group 11 reaches waypoint 8, 0
Actions:
Teleport group 11 to target 2
Event 11: Recalling Soldiers
Bad Texttool String Group 11 reaches waypoint 8, 0 and
Event 10 has been triggered
Actions:
Redirect group 15 to waypoint list 8
Event 12: Soldiers gettong chopper
Delay event 25 seconds
Bad Texttool String Group 15 reaches waypoint 8, 0
Actions:
Teleport group 15 to target 2
Event 13: Blackhawk returns to base
Delay event 15 seconds
Bad Texttool String Group 15 reaches waypoint 8, 0 and
Event 12 has been triggered
Actions:
Change group 6 AI AI state to Follow Waypoint
Change group 6 AI patrol speed to 55 km/h
Redirect group 6 to waypoint list 15
Event 14: Blackhawk is coming in to base
Bad Texttool String Group 6 reaches waypoint 15, 3
Actions:
Change group 6 AI AI state to Follow Waypoint
Change group 6 AI patrol speed to 20 km/h
Redirect group 6 to waypoint list 13
Event 15: Blackhawk landing
Bad Texttool String Group 6 reaches waypoint 13, 0
Actions:
Change group 6 AI AI state to Land
Event 16: Hostage is Safe and the soldiers too
Delay event 14 seconds
Bad Texttool String Group 6 reaches waypoint 13, 0 and
Event 15 has been triggered
Actions:
Teleport group 11 to target 3
Teleport group 15 to target 3
Event 17: Exscaping Convoy
Bad Texttool String Group 10 has been destroyed
Actions:
Redirect group 16 to waypoint list 14
Change group 16 AI patrol speed to 40 km/h
Event 18: Enemy HQ Patrol
Actions:
Redirect group 10 to waypoint list 16
Change group 10 AI patrol speed to 25 km/h
Event 19: Subgoal 1 Lost
Bad Texttool String Group 15 has lost 3 or more units
Actions:
Sub Goal 1 lost [Mission Critical]
Event 20: Sub Goal 2 Lost
Bad Texttool String Group 6 has been destroyed
Actions:
Sub Goal 2 lost [Mission Critical]
Event 21: Sub Goal 3 Lost
Bad Texttool String Group 11 has been destroyed
Actions:
Sub Goal 3 lost [Mission Critical]
Event 22: Subgoal 1 Won
Bad Texttool String Group 7 has been destroyed
Actions:
Sub Goal 1 won [Mission Critical]
Event 23: Subgoal 2 Won
Bad Texttool String Group 15 is within area 3 and
Group 11 is within area 3
Actions:
Sub Goal 2 won [Mission Critical]
Event 24: Subgoal 3 won
Bad Texttool String Group 12 has been destroyed
Actions:
Sub Goal 3 won [Mission Critical]
Event 25: Subgoal 4 Won
Bad Texttool String Group 19 has been destroyed
Actions:
Sub Goal 4 won [Mission Critical]
Event 26: Hostage is Safe Subgoal 5
Bad Texttool String Group 14 has been destroyed and
Group 10 has been destroyed
Actions:
Sub Goal 5 won [Mission Critical]
Event 27: Blue Wins
Delay event 10 seconds
Bad Texttool String Group 11 is within area 4 and
Group 15 is within area 4 and
Group 1 is within area 4
Actions:
Blue Win
Event 28: Red Wins
Bad Texttool String Group 6 has been destroyed and
Group 11 has been destroyed
Actions:
Red Win
This is the event I'm asking about.
Bad Texttool String Group 11 is within area 4 and
Group 15 is within area 4 and
Group 1 is within area 4
Actions:
It should work, it has in my other maps. can't under stand why this isn't working
Quote:
Ok, as you wanted me to, I check those manauls out again. Well Blue.
1 of the manuals is only 9 pages long, the other one I have is 21 pages long and the one thats on the cd is only 16. I need that 40 page manual you were telling me about.
Joe
Try this link. If you can't figure it out from the manual, send me the .mis, .til, .bin and wac file...I'll take a look.
After you set your "player start marker" highlight it and open its attributes. In the AI Variables - "Team" set this to "Good (Blue)"
Even though it says "Team" for the "player start marker" you will still use "Group" in the events set up.
So it should look like-
IF (Triggers)
Trigger Type = Group
Trigger Condition = Group Area Trigger
Triggered if = True
Trigger Variables
Group = 1-Blue Players
Area = (What ever number you set your area trigger for.)
THEN (Action)
Set Action Type to what ever outcome you want to happen after the trigger is tripped.
Yeah, what he said. I think.
Ok, blue thanks for the manual. as I thought we are talking about an other game. The manual you sent me is for BHD. I'm talking about Comanche 4.
and the bridge problem is also in comanche 4 as well. I have no idea where your got the idea that it was DF BHD. Doesn't matter I guess.
At the top. it says comache 4 map editing. so np
I will check that one out any way.
Charger. Thanks. That work like a charm.
whats was happening is that the player start maker wasn't setting it self as blue. it keeps resetting it self to green. and I have no idea way.
thats cool. It works now. Grin. This problem just sucks when you can't get things to work that way they should work.
thanks again for your help
This discussion was based your apparent refusal to post in the right forums, read manuals and use search - A totally different discussion. If you need another reminder, please reference this thread.Quote:
Quote:
Originally Posted by Bigjoe11a
You apparently don't have the DFBHD Manual. That manual is 40 pages long.Quote:
Originally Posted by Bigjoe11a
Again, this was a totally different discussion - about a different matter entirely (you not having a manual over 20 pages long).Quote:
Originally Posted by Bigjoe11a
As I am the one who spent the time moving your posts to the correct place until you finally figured it out, I am well aware what this forum says at the top. Rather catty little comment there - even for you Joe.
Novalogic's manuals and MED's are much the same for every game - what you may not figure or find out in one - you may find in another. Whether I referenced the C4 manual or BHD manual in your Bridge post - I gave you a solution.